Custom Rear-Mount Card Reader Carrier for Tablet Cases

Home > Category > Payment Terminal & Card Reader Mounts > Secure Card Reader Holders  > Custom Rear-Mount Card Reader Carrier for Tablet Cases

Product

  • China Angola Red Dual Tablet POS Stand with Card Reader Holder manufacturer

    Angola Red Dual Tablet POS Stand with Card Reader Holder

    Goochain’s Angola Red dual tablet POS stand brings a deep burgundy finish to the checkout counter. Two opposing tablet holders and a dedicated card reader arm share an aluminum base, with two USB connections and internally routed leads for the tablets. Configure the device holders, cables and finish around your store layout and approved sample.

  • China Dual Tablet POS Charging Stand with Card Reader Holder manufacturer

    Dual Tablet POS Charging Stand with Card Reader Holder

    Goochain’s dual tablet POS charging stand lets staff enter orders on one tablet while shoppers review the order and pay at the reader beside the customer display. Both tablet mounts share one freestanding base. Two built-in USB ports and internal routing for the tablet leads keep separate chargers and loose cables off the checkout surface in the reference setup. Device fit and power configuration are agreed for each project.

  • China Custom Multi-Bay Charging Station for Cased Payment Readers manufacturer

    Custom Multi-Bay Charging Station for Cased Payment Readers

    Goochain develops multi-bay charging stations for payment readers that remain inside approved protective cases. Each project defines the complete reader-and-case assembly, bay guides, pickup clearance, charging interface and simultaneous device quantity. Station geometry, cable modules, indicators and branding can be customized. Bay count and power requirements are confirmed for the approved configuration; this is an OEM/ODM development solution rather than a universal charger for all readers or cases.

  • China Custom Contact and Cable Assembly for Card Reader Docks manufacturer

    Custom Contact and Cable Assembly for Card Reader Docks

    Goochain manufactures custom contact and cable assemblies for card reader docks. Each interconnect combines a project-approved reader-side or dock-side interface with the required cable termination, mounting support and strain relief. Contact layout, conductor mapping, cable length and any signal requirements are defined from authorized project information. The contact-and-cable subassembly can be supplied separately for integration into the customer's housing; full docks and power accessories are included only when quoted.

News

Wireless Pogo Pin Charging Dock for Retail POS Systems & Tablets – Fast & Customizable Charging Solution

Wireless Pogo Pin Charging Dock for Retail POS Systems & Tablets – Fast & Customizable Charging Solution

2025-02-17 19:10:33

Looking for an efficient wireless charging solution for POS systems, tablets, and smartphones? Our ISO-certified Pogo Pin charging dock offers fast, clutter-free charging for your retail business, with custom solutions tailored to your needs.

Goochain at IFA 2025 – Berlin, Germany

Goochain at IFA 2025 – Berlin, Germany

2025-08-13 20:19:25

We’re excited to announce that Dongguan Goochain Technology Co., Ltd. will be exhibiting at IFA 2025 in Berlin this September.

Unlocking Efficiency Multifunctional USB Type-C PoE HUB for Retail and POS equipments

Unlocking Efficiency Multifunctional USB Type-C PoE HUB for Retail and POS equipments

2024-12-11 20:27:09

Our innovative USB Type-C PoE HUB is a multifunctional device offering Power over Ethernet (PoE), efficient data transfer, and multi-device compatibility. Designed for retail, healthcare, and smart office applications, it features dual USB-C ports for data access, iPad Host functionality, and PD fast charging. As a manufacturer, we provide high-quality, customizable connectivity solutions.

Why POGO PIN is Essential for Modern POS Accessories

Why POGO PIN is Essential for Modern POS Accessories

2025-06-28 17:18:11

For modern Point-of-Sale (POS) accessories, POGO PINs are a must-have. They create stable electrical connections, perfect for busy retail settings where devices are constantly in use. Their small size allows for sleek, compact POS designs, like in handheld terminals or card readers. POGO PINs also enable fast data transfer and charging, key for quick transactions. Plus, they’re durable and resistant to corrosion, meaning less maintenance and longer use. In short, POGO PINs make POS systems work better, faster, and more reliably.

Goochain Shines at CES 2025

Goochain Shines at CES 2025

2025-01-16 20:18:55

Goochain showcased its latest innovations at CES 2025, including Magnetic Pogo Pin Charging Stations, Custom Cable Assemblies, and USB Type-C PD Splitter Boxes. The event provided valuable opportunities to connect with global clients, gain industry insights, and highlight our expertise as a manufacturer, supplier, and factory for POS hardware and charging solutions in retail and healthcare.

Choosing the Right POS Stand: A Guide to Secure and Efficient Payment Terminal Mounts

Choosing the Right POS Stand: A Guide to Secure and Efficient Payment Terminal Mounts

2025-02-08 09:23:20

How to Choose the Right POS Stand for Your Business A high-quality POS stand improves payment efficiency, security, and customer interaction in retail and hospitality settings. Whether you need an adjustable POS terminal stand, a dual-payment mount for tablets and card readers, or a wall-mounted POS holder, selecting the right stand enhances workflow and space management. At Goochain, we manufacture durable and customizable POS stands for various industries. Explore our top products: POS Terminal Stand PS-1020 – Secure and adjustable for smooth transactions. 2-in-1 POS Stand – Supports both tablets and card readers. Universal Secure POS Stand – Stable, ergonomic, and theft-resistant. Wall-Mounted POS Tablet Holder – Space-saving and ideal for self-service kiosks. As a POS stand manufacturer and supplier, we offer OEM & ODM customization and factory-direct pricing. Contact us today to find the best POS mount for your business!

Goochain Technology at CES 2025 | Showcase of Innovative POS Mounts & Tablet Charging Solutions

Goochain Technology at CES 2025 | Showcase of Innovative POS Mounts & Tablet Charging Solutions

2024-12-20 16:57:03

Goochain will be exhibiting at CES 2025, booth number LVCC SOUTH HALL-3-41265, showcasing the latest POS terminal mounts, tablet charging stations, Pogo Pin charging docks, and more. Visit us to learn more.

Tablet Charging Dock Solutions for Business | Multi-Tablet Charging Station Manufacturer – Goochain

Tablet Charging Dock Solutions for Business | Multi-Tablet Charging Station Manufacturer – Goochain

2025-10-24 18:23:14

Goochain is a factory manufacturer specializing in tablet charging docks and multi-tablet charging stations for POS, retail, and healthcare industries. Certified ISO 9001 & ISO 13485 supplier providing OEM & ODM solutions.

Goochain to Exhibit at CES 2026 in Las Vegas

Goochain to Exhibit at CES 2026 in Las Vegas

2025-12-18 19:05:03

Goochain to Exhibit at CES 2026 in Las Vegas

Goochain at Global Sources Electronics Show 2025 – Transforming Retail & POS with Smart Charging Solutions

Goochain at Global Sources Electronics Show 2025 – Transforming Retail & POS with Smart Charging Solutions

2025-03-16 10:22:18

Goochain will exhibit at Global Sources Electronics Show 2025 from April 11-14 at Booth 10N05, Hong Kong, showcasing our latest Retail & POS charging solutions. Our featured products include tablet charging docks, magnetic pogo pin connectors, custom POS cables, wiring harnesses, and USB FPC ribbon cables. As a leading manufacturer of POS accessories and retail connectivity solutions, we provide customized and high-performance products to enhance checkout efficiency and device longevity. Visit us to explore our innovations and discuss OEM/ODM partnerships.

Contact us

We value your interest in our products and services. If you have any questions or need more information, feel free to contact us. Our team is ready to assist you!
Global Call: +86 15913803231
LOCATIONS
Goochain is Located in the industrial center, Dongguan, China

Custom Rear-Mount Card Reader Carrier for Tablet Cases

Goochain develops rear-mount card reader carriers as OEM/ODM components for tablet POS cases. The carrier is matched to the chosen reader and customer-defined case interface, with locating surfaces, fixing points and payment-access clearance reviewed together. Geometry, material, finish and branding can be customized. The quotation defines the carrier, fixing parts and any agreed connection subassembly; a complete tablet case, reader or charging dock is specified separately.

  • Product Details
  • Specifications
  • Company Info
  • Certificates
  • FAQ
  • Related product

Product Details

OEM / ODM MANUFACTURING

Goochain develops custom rear-mount card reader carriers for integration with tablet POS cases.

This product is the reader-side carrier component, rather than a complete tablet enclosure. It is suited to hardware brands and integrators that already have a case design and need a manufacturer to develop or supply the reader attachment.

Fit the reader to your existing case interface

The carrier is designed around two sets of geometry: the reader it holds and the case it attaches to. Its locating surfaces, fixing points and access openings are reviewed against both. This allows the project to focus on the reader attachment without presenting an entire tablet housing as the purchased part.

The attachment can be permanent in daily use or removable with the agreed tools. The brief should identify who removes it and which neighboring parts must remain installed. A modular replacement system is an option only where that interface is deliberately developed.

Use Fixed vs Detachable Card Reader Module for mPOS to specify who removes the carrier, how it is retained and which parts remain attached during service. A detachable arrangement is included only when developed for the agreed case interface.

Preserve handling and payment access

Reader position changes the space available for the operator’s hand and the customer’s card. Goochain reviews the loaded carrier with the tablet case in its normal orientation. The required controls, indicator areas and payment interaction zones remain part of the fitting review.

The carrier should support the reader mechanically. A cable plug or contact module is not used as the primary fastening feature. Clearance for the connection is included without assuming that mounting alone supplies power or data.

Review the loaded assembly using Card Reader Integration for a Custom Tablet Case, paying attention to grip clearance, card access, cable routing and the tablet case's normal operating orientation.

Component manufacturing with Goochain

Goochain is an OEM/ODM manufacturer in Dongguan, China, with more than 10 years of manufacturing experience. Custom cable assemblies, plastic molding, overmolding, connector integration and final assembly support are relevant to this component. We can review a customer drawing or develop the carrier from the device and case samples. Goochain maintains ISO 9001 and ISO 13485 quality management certifications. The supplied accessory and its target market determine any additional product-specific requirements. See OEM & ODM Solutions for POS Accessories for the broader manufacturing scope. Manufacturing is based at Goochain's 5,000 m² facility in Dongguan, China.

Define your carrier order

Provide the reader sample, case mating drawing, preferred fixing method, connection arrangement and quantity to goochain@goochain-tech.com. Tablet cases, readers and charging docks are separate items unless included in the quotation.

Custom configuration

Parameter Project configuration
Product type Custom rear-mount card reader carrier component
Supply item Reader carrier and agreed fixing parts
Reader compatibility Customer-selected reader model and revision
Tablet case interface Customer-defined rear surface, locating features and fixing points
Attachment method Fixed in daily use or service-removable as specified
Payment access Card, hand and control clearance reviewed with the loaded case
Connection scope Cable clearance or an expressly included cable/contact subassembly
Electrical function Mechanical mounting only unless an electrical interface is specified
Material and finish Selected for the approved structure and production requirements
Carrier dimensions Defined against the reader sample and case mating drawing
Service requirements Removal sequence, tools and neighboring-part clearance defined by project
Customization Geometry, fixing features, material, finish, logo and packaging
Verification scope Project-agreed fit, retention and assembly checks
Supply boundary Complete case, reader and dock excluded unless included in the quotation
Manufacturer Goochain, Dongguan, China; OEM/ODM component manufacture

Specifications

  • Product type

    Custom rear-mount card reader carrier component

  • Supply item

    Reader carrier and agreed fixing parts

  • Reader compatibility

    Customer-selected reader model and revision

  • Tablet case interface

    Customer-defined rear surface, locating features and fixing points

  • Attachment method

    Fixed in daily use or service-removable as specified

  • Payment access

    Card, hand and control clearance reviewed with the loaded case

  • Connection scope

    Cable clearance or an expressly included cable/contact subassembly

  • Electrical function

    Mechanical mounting only unless an electrical interface is specified

  • Material and finish

    Selected for the approved structure and production requirements

  • Carrier dimensions

    Defined against the reader sample and case mating drawing

  • Service requirements

    Removal sequence, tools and neighboring-part clearance defined by project

  • Customization

    Geometry, fixing features, material, finish, logo and packaging

  • Verification scope

    Project-agreed fit, retention and assembly checks

  • Supply boundary

    Complete case, reader and dock excluded unless included in the quotation

  • Manufacturer

    Goochain, Dongguan, China; OEM/ODM component manufacture

Company Info

  • Years history

  • Factory area

  • Annual output

  • Sales countries and regions

Goochain is a leading manufacturer and factory specializing in POS system accessories, Pogo Pin charging docks, custom cable assemblies, and tablet enclosures. With a state-of-the-art 5000m² production facility and over a decade of industry expertise, we are committed to delivering innovative and reliable solutions to clients across global markets. Our products are widely recognized for their quality, durability, and efficiency, catering to diverse industries such as retail, healthcare, and consumer electronics. Certified by ISO 9001, ISO 13485, CE, RoHS, FCC, Reach, and UKCA, we strictly adhere to international quality and compliance standards, ensuring that every product meets the expectations of our customers. Our comprehensive capabilities include design, prototyping, development, and large-scale production, which allow us to provide customized solutions tailored to unique business needs. At Goochain, we prioritize customer satisfaction, efficient supply chain management, and continuous innovation, making us a trusted and dependable partner for businesses worldwide.

More+

International Certitfications

International Certitfications
Product description certificate

Frequently Asked Questions

What is your order process?

Our order process is efficient and transparent:

  1. Requirement Confirmation and Initial Communication: Customers submit their requirements, and we confirm and discuss specific details within 12-24 hours.
  2. Quotation and Proposal: The quotation will be completed within 1-2 business days, along with a technical proposal.
  3. Custom Design and Development: Once the quotation is confirmed, the standard custom development cycle is 10-15 business days. For multi-functional PCBA products, including hardware design, PCBA design, and software development, the cycle is typically 25-30 days.
  4. Sample Confirmation and Modifications: We provide samples for customer confirmation. Sample approval typically takes 5-7 business days, with adjustments made based on feedback.
  5. Mass Production and Quality Inspection: After sample approval, the production cycle is 15-20 business days, ensuring that every detail meets the standard.
  6. Delivery and After-Sales Service: Once production is completed, the delivery time is typically 2-5 business days, and we provide comprehensive after-sales service to ensure customer satisfaction.

Why should you choose us as a supplier?

We are recognized and trusted by industry-leading clients such as Lightspeed, Square, AppCard, and Celestica. By choosing us, you will have a long-term reliable partner. We not only have strong R&D and production capabilities but also offer custom services to ensure products meet your specific requirements. Furthermore, our products are certified internationally, ensuring top-quality standards, competitive pricing, and timely delivery.

What are your production capabilities and advantages in R&D?

We have a over 5000-square-meter production facility, equipped with advanced production equipment and an experienced engineering and R&D team. This enables us to efficiently produce and continuously drive technological innovation. We offer tailored production solutions for each project, ensuring that products are produced efficiently and precisely.

Do you offer custom services?

Yes, we offer comprehensive custom services covering all aspects from hardware design to software development, ensuring that every customer’s specific needs are precisely met. Our custom services include:

  • Hardware Design and Development: We customize the product appearance, structure, and functionality according to customer needs, ensuring the product fits perfectly with the application scenario.
  • PCBA Design and Optimization: We provide a complete range of services from circuit design, PCB layout, assembly, and testing, ensuring efficient and reliable electronic performance.
  • Software Development and Customization: We develop embedded systems, drivers, and applications to ensure seamless integration between software and hardware for optimal performance.
  • Function Testing and Verification: We conduct strict function tests and quality verifications to ensure that the product meets the customer's high standards.
  • Production and Delivery Support: We provide comprehensive support from small batch samples to large-scale production, ensuring timely delivery and guaranteed quality.

What certifications do you have, and how do you ensure product quality?

We are certified with ISO 9001 and ISO 13485:2015, strictly following international quality management standards to ensure that every product meets the highest industry standards. Our medical products are also certified by FDA, CE, MDR, and other relevant certifications.

What products does your company specialize in?

We specialize in the design, development, manufacturing, and distribution of POS stands, tablet charging stations, Pogo Pin charging docks, retail charging solutions, consumer electronics accessories, and related products, offering high-quality solutions for retail, medical, and industrial applications.

Goochain Technology Co.,Ltd.

Contact Us

Follow Us:
Your Name:
Company:
Phone Number:
Email address: *
Question / Comment: *
Verification code: *
captcha

RELATED PRODUCTS

Browse our related products to explore more options that perfectly suit your needs and provide enhanced solutions.