Goochain’s Angola Red dual tablet POS stand brings a deep burgundy finish to the checkout counter. Two opposing tablet holders and a dedicated card reader arm share an aluminum base, with two USB connections and internally routed leads for the tablets. Configure the device holders, cables and finish around your store layout and approved sample.
Goochain’s dual tablet POS charging stand lets staff enter orders on one tablet while shoppers review the order and pay at the reader beside the customer display. Both tablet mounts share one freestanding base. Two built-in USB ports and internal routing for the tablet leads keep separate chargers and loose cables off the checkout surface in the reference setup. Device fit and power configuration are agreed for each project.
Goochain develops multi-bay charging stations for payment readers that remain inside approved protective cases. Each project defines the complete reader-and-case assembly, bay guides, pickup clearance, charging interface and simultaneous device quantity. Station geometry, cable modules, indicators and branding can be customized. Bay count and power requirements are confirmed for the approved configuration; this is an OEM/ODM development solution rather than a universal charger for all readers or cases.
Goochain manufactures custom contact and cable assemblies for card reader docks. Each interconnect combines a project-approved reader-side or dock-side interface with the required cable termination, mounting support and strain relief. Contact layout, conductor mapping, cable length and any signal requirements are defined from authorized project information. The contact-and-cable subassembly can be supplied separately for integration into the customer's housing; full docks and power accessories are included only when quoted.
Goochain manufactures custom contact and cable assemblies for card reader docks. Each interconnect combines a project-approved reader-side or dock-side interface with the required cable termination, mounting support and strain relief. Contact layout, conductor mapping, cable length and any signal requirements are defined from authorized project information. The contact-and-cable subassembly can be supplied separately for integration into the customer's housing; full docks and power accessories are included only when quoted.
OEM / ODM MANUFACTURING
Goochain manufactures custom contact and cable assemblies for card reader docking hardware.
This component links a specified reader-side or dock-side interface to the cable termination required by the customer’s design. It is an OEM/ODM supply option for teams developing their own housing, base or charging platform.
The project needs a clear interface definition at each end. Record the contact layout, conductor mapping, connector orientation and mechanical mounting envelope. Where a spring-loaded contact is selected, its working position and the device guide geometry must be reviewed together.
The assembly may use Pogo Pin contacts or another device-appropriate interface. Selection follows the electrical and mechanical requirement; it is not based only on the appearance of an existing reader dock. Original-brand pin assignments are not inferred from photographs.
Cable length, conductor construction, shielding where required, strain relief and connector-end dimensions are selected for the approved function and route. An overmolded cable end can be evaluated where the design needs a controlled shape or handling feature.
The housing should retain and locate the component without loading the connection during assembly or reader removal. Mounting tabs, cable exits and test access belong to the component drawing and the dock integration review.
Goochain’s capabilities include custom cable assemblies, Pogo Pin connectors, plastic molding, overmolding, assembly and testing. This allows the contact part, cable termination and molded support to be considered together. Goochain maintains ISO 9001 and ISO 13485 quality management certifications. The supplied accessory and its target market determine any additional product-specific requirements. Our OEM & ODM Solutions for POS Accessories scope can cover development from the customer interface through prototype and agreed production checks. Manufacturing is based at Goochain's 5,000 m² facility in Dongguan, China.
Mapping, continuity and charging checks are defined for the supplied component. Data-related performance, when required, needs an appropriate verification method; continuity alone is not evidence of complete system operation.
Provide the authorized interface definition, mating sample, available space, cable end requirement and forecast volume to goochain@goochain-tech.com. For the surrounding dock structure, Custom Single-Bay Pogo Pin Charging Dock provides context. Readers, payment software, power adapters and complete dock housings are outside this component supply unless expressly included.
| Parameter | Project configuration |
|---|---|
| Product type | Custom contact and cable interconnect subassembly |
| Integration target | Card reader dock or customer-defined charging hardware |
| Contact interface | Pogo Pin or another approved project interface |
| Contact arrangement | Count, layout and mating direction defined by the authorized interface |
| Conductor mapping | Customer-authorized pin and conductor definition |
| Cable termination | Specified connector, wire termination or board connection |
| Cable construction | Length, conductor size and shielding selected for the approved function |
| Electrical rating | Specified for the approved contact, conductor and connector system |
| Data or signal scope | Included only with a defined interface and verification plan |
| Mechanical support | Contact holder, cable exit and mounting features defined by drawing |
| Strain relief | Cable support or overmolding assessed for the assembly route |
| Verification scope | Agreed mapping, continuity and functional checks |
| Customization | Interface, cable, termination, molded support and assembly |
| Supply boundary | Interconnect only; full dock, reader and adapter excluded unless quoted |
| Manufacturer | Goochain, Dongguan, China; OEM/ODM manufacture |
Goochain manufactures this accessory. Reader brands and model names identify the intended device only; no authorization or endorsement by the reader brand owner is claimed.
Custom contact and cable interconnect subassembly
Card reader dock or customer-defined charging hardware
Pogo Pin or another approved project interface
Count, layout and mating direction defined by the authorized interface
Customer-authorized pin and conductor definition
Specified connector, wire termination or board connection
Length, conductor size and shielding selected for the approved function
Specified for the approved contact, conductor and connector system
Included only with a defined interface and verification plan
Contact holder, cable exit and mounting features defined by drawing
Cable support or overmolding assessed for the assembly route
Agreed mapping, continuity and functional checks
Interface, cable, termination, molded support and assembly
Interconnect only; full dock, reader and adapter excluded unless quoted
Goochain, Dongguan, China; OEM/ODM manufacture
Years history
Factory area
Annual output
Sales countries and regions
Goochain is a leading manufacturer and factory specializing in POS system accessories, Pogo Pin charging docks, custom cable assemblies, and tablet enclosures. With a state-of-the-art 5000m² production facility and over a decade of industry expertise, we are committed to delivering innovative and reliable solutions to clients across global markets. Our products are widely recognized for their quality, durability, and efficiency, catering to diverse industries such as retail, healthcare, and consumer electronics. Certified by ISO 9001, ISO 13485, CE, RoHS, FCC, Reach, and UKCA, we strictly adhere to international quality and compliance standards, ensuring that every product meets the expectations of our customers. Our comprehensive capabilities include design, prototyping, development, and large-scale production, which allow us to provide customized solutions tailored to unique business needs. At Goochain, we prioritize customer satisfaction, efficient supply chain management, and continuous innovation, making us a trusted and dependable partner for businesses worldwide.
More+
Our order process is efficient and transparent:
We are recognized and trusted by industry-leading clients such as Lightspeed, Square, AppCard, and Celestica. By choosing us, you will have a long-term reliable partner. We not only have strong R&D and production capabilities but also offer custom services to ensure products meet your specific requirements. Furthermore, our products are certified internationally, ensuring top-quality standards, competitive pricing, and timely delivery.
We have a over 5000-square-meter production facility, equipped with advanced production equipment and an experienced engineering and R&D team. This enables us to efficiently produce and continuously drive technological innovation. We offer tailored production solutions for each project, ensuring that products are produced efficiently and precisely.
Yes, we offer comprehensive custom services covering all aspects from hardware design to software development, ensuring that every customer’s specific needs are precisely met. Our custom services include:
We are certified with ISO 9001 and ISO 13485:2015, strictly following international quality management standards to ensure that every product meets the highest industry standards. Our medical products are also certified by FDA, CE, MDR, and other relevant certifications.
We specialize in the design, development, manufacturing, and distribution of POS stands, tablet charging stations, Pogo Pin charging docks, retail charging solutions, consumer electronics accessories, and related products, offering high-quality solutions for retail, medical, and industrial applications.
Browse our related products to explore more options that perfectly suit your needs and provide enhanced solutions.